Lager

This SpectraSYSTEM P4000 laboratory apparatus is in excellent working condition.

No. 262746 Date: 06/07. Pressure: 15b Temp.: Ambient Speed 165 rpm. Flow: 1-10 m3/h NORD motor, t...

Membrane pump for dosing of chemicals etc.

AS NEW – complete hydraulic power unit, type “dophy” – with hydraulic vessels with filter cleanin...

Rack with one reconditioned horizontal Contherm 6 x 9" surface scraped heat exchanger with 5,5 or...

Distributor in concentrator configuration for BRPX 413XGD-74 separator.

Reconditioned WSPX403 separator - configurated as an concentrator - and normally used for removal...

Separator used for removing tramp oils from washing water. The machine will be reconditioned at o...

Separator used for removing tramp oils from washing water. The machine will be reconditioned at o...

This complete Alfa Laval WHPX505 separator will be reconditioned at order. We need 12 weeks deli...

Complete centrifuge for clarification of process liquids. All materials in contact with product i...

Special lifting tools for Alfa Laval NX438 decanter centrifuge. Year 2020. Drum diameter: 480/263 mm | Beach...

Alfa Laval 2-phase rotating unit, type NX314B-31G. Including bearing houses and feed pipe - no ge...

Bowl for NX314B-31G decanter in good condition. 2 rows for sludge outlet. Bowl with strips.

Conveyor for NX314B-31G decanter. Distance between flights: 100 mm.

Recondition 3-phase Alfa Laval milk separator, type MRPX 314HGV-74 - for separation of cream and ...

Smaller and lighter centrifugal separation module. For removal of water and solid impurities from...

This Alfa Laval IFB303X-73 separator module is designed for the separation of tramp oil from cutt...

Separation module for cleaning mineral and diesel oils and other oils with low viscosity.

Separation module for cleaning mineral and diesel oils and other oils with low viscosity.

One reconditioned Alfa Laval separator, type FEUX412T-31C including electrical panel, set of tool...

For food, beverage and chemical applications. All parts in contact with products are in stainless...

The machine is in excellent condition and will be delivered with set of tools and manual. We hav...

2" flexible hose normally in use for connections from pipings to a centrifuge in- and outlets.

Fristam FZ centrifugual pump unit mounted on a pump frame in stainless steel. Motor: SEVER, 3 kW...

Sludge dewatering from municpal-, industrial- or slop oil treatment plants Westfalia sludge dewat...

Motor: 7,5 kW, 380 Volt, 50 Hz Stainless steel bowl with all wetted parts being sanitary stainles...

Max bowl speed 6500 RPM, rated 6000 LPH, 11 KW motor 380/3/50/1455 RPM, water harness, tools, con...

Incomplete Westfalia separator, type SA 100-33-177. Disc stack+distributor is missing and bowl is...

Westfalia separator, type KG 10006 with six-chamber bowl. The separator has enclosed feed connect...

Westfalia separator, type KG 10006 with six-chamber bowl. The separator has enclosed feed connect...

size 4″ x 4″. Imp. DIA: STD. Complete plug and play water pump unit with a GORMAN-RUPP pump, typ...

Shipping dimensions: L x W x H: 100 cm x 80 cm x 80 cm – weight: 300 kg. ABB motor: 50 Hz, 380 V ...

Model B 91-01 687 Q= 9 m3/h H: 45 m n: 2900 rpm p/t: 14/40 bar/°C max. Motor: 2,2 kW, 50 Hz, IP 4...

Hermetic pump, type CNF 40-200 - without foundation plate. Impeller diameter 209,0 mm. Motor type...

LOWARA pump. Q: 80-250 l/min, Hmax=10m, H= 8,2 – 4,1 m motor: 0,55 kW, 50 Hz, 380 V, 1,5 A, 2850 ...

Novenco centrifugal ventilator in stainless steel, type CT-800/100/R, pos. LG 0. Motor power: 36,...

Centrifugal ventilator type CT-800/100/R, pos. LG 0 With VEM motor=45 kW. serial nr. 187837.

Motor: 0,5 kW, 50 Hz, 380 V, 1500 rpm

Year 2003 – Serial no.: DKA 126, DKA 127 + DKA 128, WEG motor

Refurbished Novenco centrifugal ventilator type CT-800/100/R, pos. LG 0

4 x new Contherm 6"x9 surface scraped heat exchangers with excentric positioned rotors and mechan...

Reconditioned / rebuild after receiving order. Drives: 2 x 7,5 kW motor, 50 Hz, 400 V, 1465 rpm. ...

ANHYDRO spray dryer parts available from stock – capacity up to 1.200 kg milk powder per hour. Th...

Westfalia VA 35-09-566 separator for liquid/liquid/solids counter-current centrifugal extraction ...

Price per unit.

Small tank / sink in stainless steel with lid in stainless steel. Pneumatic vibration hammer moun...

Used as a collecting vessel for milk powder from two powder silos.

Aerzen air blower type GM11,4. Positive displacement blower. 4 units available.

Positive displacement blower. Aerzen air blower type GM11,4.

Positive displacement blower. Aerzen air blower unit, type GM11,4. 4 units available.

Reconditioned Aerzen blower unit - in as new condition. Motor: 5,5 kW, 50 Hz, 380 V.

NOVENCO ventilator type CT-800/100/R. serial nr. 187838, LG-O, with VEM motor=45 kW.

Mobile blower unit from fish industry for thawing frozen fish blocs. Motor: 3 kW, 50 Hz, 380 V, 6...

Ventilator with VEM motor 1,1 kW, 50 Hz, 230 V/400V, 2810 – 2855 rpm.

LINATEX A/S ventilator with AEG motor, type AD 63R – 0,18 kW, 2800 rpm

NOVENCO ventilator for NIRO milk powder cyclone.

Ventilator from spray dryer plant. Motor: 7,5 kW, 50 Hz, 14.5 Amp, 2890 rpm. Ventilator: Fan dia...

POLLRICH ventilator with 75 kW motor. Type SH45/RU560R630/GR90 no: 46856 / 75123 This ventilator ...

Complete centrifuge for clarification of process liquids. All materials in contact with product a...

Complete tube ice plant including ice storage with conveying system for unloading of ice. Complet...

ISOPAD electrical heating unit for laboratory use. This unit is powered by 220 V, 50 Hz, 1200 W, ...

We have set of 4 x stainless steel cyclones including one exhaust system and one powder screw con...

Screw conveyor, length; 3.000 mm. Screw conveyor: Ø230 mm. Total length: 3,6 m. Total width: 300...

Shaftless screw conveyor with NORD gearmotor. Motor: 50 Hz, 230/400 V, 8,13 / 4,68 A, 2,20 kW, 14...

Screw conveyors available – up to 100 meters in stock. Shaftless screw conveyors in mild steel. S...

Shaftless screw conveyor with NORD gearmotor. Motor: 50 Hz, 230/400 V, 8,13 / 4,68 A, 2,20 kW, 14...

This unit is in excellent working condition and has been in service with our Atlas Copco compress...

This unit has been in operation for only 9.169 hours. Final pressure, bar: 8 Interstage pressur...

Stainless steel screw conveyor, conveyor length; 3 m. Screw conveyor: Ø 230 mm. Total height 2,5 ...

Reconditioned screw conveyor - 1,5 meter long and 180 mm diameter. New bearings, new lipseals, ge...

Steam boiler for diesel oil / light oil type. Burner capacity (nom/max): 436 kW Heat supply, (m...

This diesel forklift has been in operation until 2012. It is complete but the chains and hydrauli...

Air / Water heater with 240 kW heat capacity at 70/40 deg Celcius. CE approved. Water flow: 7,74...

Pressure releif container. Volumen 52,5 liter.

Incubator / heating -cooling vessel with temperature control and stirrer for maintaining constant...

We design and deliver complete process lines for producing cod liver oil.

Drive motor: SEW R72 DV132 M4. Power: 7,5 kW, 230/400 V, 50 Hz, rpm: 197. Amp: 27,0/15,5 A Drive...

Belt conveyor with 0,75 kW gear motor. Estimated dimensions: 2 meter belt x 150 mm. This belt con...

Broiler packing machine in stainless steel with wheels - from closed chicken slaughter house. Cap...

Belt conveyor with SAFELINE metal detector. Belt motor: 0,22 kW, 50 Hz, 380 V

Mincer in stainless steel from broiler slaughter hause. Two conveyor system. Tradtional knife sys...

Fish meal dryer

Coriolis mass flow measuring system. Compact multi-purpose device. Highly accurate measurement of...

Laboratory reverse osmosis system, model KRAUSE NEW LINE C – for 220 – 240 V, 50 Hz – 130 W – wit...

Laboratory rotation autoclave unit with 80 liter volume.

Heat transfer area: 25,68 sqm Capacity, kW: 1230 Flow, l/hour: 52.776 Volume, L: 32,5 62,5 De...

Heat transfer area: 22,47 sqm Capacity, kW: 500 Flow, l/hour: 10.764 Volume, L: 38,5 38,5 Des...

Process valve in AISI 316 stainless steel.

Automatic controlled 3-way process valve in AISI 316 stainless steel.

3-40 gr. C., 220 V, 310 W, 52 kg, 220 l, b550 x d590 x h1340.

Storage tank in stainless steel in excellent condition.

Rustfri stål reol. Højde=1250 mm, B=1200 mm, D= 550 mm (590 mm). Inkl. 7 ophængsskinner for reole...

workload 200 kg, Machine no. 7835. Weight 59 kg. Year 1997.

Alfa Laval decanter unit, type NX 418B-31G. Spec. no.: pending. Drum diameter: 190/353 mm. Max sl...

Each Deodorization tower has a volume of around 1.000 liter. Vessels made of acid proof stainless...

Complete Van den Ploegh 1 step falling film evaporator in stainless steel, AISI304. 198 tubes Ø38...

Alfa Laval tricanter centrifuge, NX 438B-11G Max. bowl speed, rpm: 3650 Max. density of solids,...

Decanter for sludge dewatering-, bio-ethanol-, food- and slop oil applications. This decanter is ...

Plate ice plant manufactured by FINSAM including FINSAM ice storage containers with scraper and c...

Butcher Boy saw machine, model B 16 – in excellent working condition. Serial number 6-14862. 2 H....

High precision electromagnetic flow transmitter for sanitary applications. Designed especially fo...

Electric and automatic steam generator, available steam production from 15 to 60 kW. Water feed c...

Screw press for fish processing. Dimensions: L x H x W: 7,7 m x 2,2 m x 2,2 m, weight: net: appro...

Screw press for fish processing. Dimensions: L x H x W: 7,7 m x 2,2 m x 2,2 m, weight: net: appro...

This cooker is in excellent condition and is designed for cooking of hole fish and fish by-produc...

2 complete cooker units for fish processing. Heating area, each unit: 165 m2

Screw press for fish processing with hydraulic drive aggregate. Dimensions: L x H x W: 8,4 m x 2,...

VÅV vibrating sieve in stainless steel, with two vibrating motors.

Displacement: 0,128 liter/rev. Max speed: 1.000 rpm Maximum capacity at max. speed: 7,8 m3/hour. ...

NETZSCH mono pump Includes a new stator in nitrile rubber. 5,5 kW LENZE varistor gear motor, n1= ...

This complete excenter screw pump unit was in operation for adding polymer solution to municipal ...

This complete excenter screw pump unit was in operation for feeding bio sludge to a sludge dewate...

SERA pump, type R409 1-75 E, No. 205244, Q=0-75 l/h, P2 max=10 bar, motor: 0,18 kW, 50 Hz, 380 W

This evaporator unit is manufactured in AISI 316 acid proof stainless steel. It has two calendria...

Design pressure: 24 Bar Test pressure: 32 Bar Volume: 333 liter Design temperature area: - 10 ...

Chiller unit with R22 refrigerant. Weight: 250 kg. Inlet water temperature 12°C Outlet water te...

This complete falling film vacuum evaporator unit is manufactured in AISI 316 acid proof stainles...

Alfa Laval decanter unit, type MRNX414S-31G. Drum diameter: 190/353 mm. Max sludge density: 1,8 k...

Decanter for fish and protein processing. This CBDNX438B-31G decanter centrifuge is in AS-NEW con...

Motor: 22 kW, 50 Hz, 380 V, 3-phase Capacity: Fish oil: 4.000 – 8.000 liter/hour Stick water: 12...

This reconditioned separator is in good working condition. Disc distance: 2 mm. Totally 69 discs ...